Skip to main content

Introduction

Overtime, earmuffs for headphones need to be replaced. Follow these simple steps to learn how to replace your earmuffs. If you plan to replace the earmuffs, a replacement can be found form the Corsair site. It is also important to know how to disassemble the earmuffs in order to do most replacements or repairs for the headphones.

  1. Carefully remove earmuff from headphones by getting a grip under the earmuff cushion and peeling up over the lip that keeps it in place.
    • Carefully remove earmuff from headphones by getting a grip under the earmuff cushion and peeling up over the lip that keeps it in place.

  2. Using the Phillips #0 screwdriver, unscrew the seven 6.4 mm screws holding the black speaker cover in place. If you are disassembling the lefthand earfmuff, there will be eight 6.4 mm screws to remove.
    • Using the Phillips #0 screwdriver, unscrew the seven 6.4 mm screws holding the black speaker cover in place.

    • If you are disassembling the lefthand earfmuff, there will be eight 6.4 mm screws to remove.

  3. Remove and set aside the black panel, taking care to keep the wires attached. The panel should lift up without much force. If the panel does not budge, carefully use the  iFixit plastic opening tool to dislodge the piece.
    • Remove and set aside the black panel, taking care to keep the wires attached.

    • The panel should lift up without much force. If the panel does not budge, carefully use the iFixit plastic opening tool to dislodge the piece.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Elizabeth Claypool

Member since: 04/15/2019

388 Reputation

1 Guide authored

Team

Cal Poly, Team S9-G13, Maness Spring 2019 Member of Cal Poly, Team S9-G13, Maness Spring 2019

CPSU-MANESS-S19S9G13

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 9

Past 30 Days: 28

All Time: 1,953