Introduction
This guide will show you how to replace the scroll wheel for a Corsair Scimitar. The scroll wheel is the small disk in the middle of the mouse that allows you to scroll up and down pages easily when you rotate it. You may need to replace the scroll wheel of your Corsair Scimitar if the scroll wheel resists being rotated, if the scroll wheel does not rotate at all, or if the scroll wheel rotates but doesn't respond to scrolling.
Replacement scroll wheels are sometimes difficult to find online to purchase. If you have a 3D printer available to you, 3D printing the scroll wheel is a viable alternative to purchasing one. For more on 3D printing a Corsair Scimitar scroll wheel, click here.
What you need
-
-
Heat the mouse feet with a heat gun to loosen the adhesive.
-
Pry the mouse feet off of the mouse with the metal spudger.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
University of North Texas, Team 2-7, Raign Fall 2022 Member of University of North Texas, Team 2-7, Raign Fall 2022
UNT-RAIGN-F22S2G7
2 Members
1 Guide authored
