Introduction
Tired of buying new Copic Markers? Wish you could just simply replace the nib? Well, this is the guide for you!
After using a Copic Marker for a long period of time and the nib begins to curl and fray, it is time to replace it. The ink also should be refilled simultaneously at this point as it is running low. The only tools needed to complete this guide are some paper towels and a pair of tweezer!
What you need
-
-
-
-
Remove the cap of the ink bottle and tilt the container to begin filling the marker.
-
-
-
Insert the flat side of the new nib facing the opening of the marker until it snaps into place.
-
Set the marker down after replacing new nib.
-
-
-
Wait 3 minutes for the color to spread through the nib until it is no longer white.
-
Press on the middle of the marker 3 times to insure ink is spread throughout.
-
Ask FixBot
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
UC Davis, Team S1-G5, Coad Spring 2017 Member of UC Davis, Team S1-G5, Coad Spring 2017
UCD-COAD-S17S1G5
3 Members
12 Guides authored
