Introduction

This guide will demonstrate how to remove the curling iron spoon and replace the spring.

  1. Remove the Philips #2 10 mm screws on both sides of the heat cover.
    • Remove the Philips #2 10 mm screws on both sides of the heat cover.

    • Make sure device is unplugged and cool before attempting to replace parts.

    Add Comment

  2. Remove the plastic washers from both sides.
    • Remove the plastic washers from both sides.

    Add Comment

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Loosen the spring's Philips #2 13 mm screw.

    Add Comment

    • Remove the spring.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Jonathon Bruer

Member since: 11/09/2017

553 Reputation

5 Guides authored

Team

IUPUI, Team S7-G5, Baechle Fall 2017 Member of IUPUI, Team S7-G5, Baechle Fall 2017

IUPUI-BAECHLE-F17S7G5

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 6

Past 30 Days: 33

All Time: 291