Compaq Presario CQ62-215dx RAM Replacement
Breana Thibodeaux and 2 other contributors
Last updated on Jul 14, 2019
Views: 1.1K
View statistics:
- Past 24 Hours:
- 0
- Past 7 Days:
- 12
- Past 30 Days:
- 81
- All Time:
- 1,095
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓Running out of memory can cause your laptop to slow down. It’s important to upgrade your RAM to optimize its performance. Upgrading your RAM is well worth it because it can prolong its lifespan.
What you need
-
-
-
Remove the battery by pushing the lock to the left and lifting the battery from its socket.
-
-
-
Once the battery is out, locate a panel that is underneath the battery compartment and unscrew the three 3mm screws with a Philips screwdriver.
-
-
-
Once removed, you should have something like in this picture. Locate the current RAM.
-
-
-
To remove the RAM, start by lifting up the first card. Grab each side of the card with two fingers as shown in the picture and pull gently until it is removed from its slot.
-
-
-
-
Insert your new RAM replacement into the slot where the old one was removed. Push until you hear a small click.
-
-
-
Push the card downward into the compartment until you hear another clicking sound.
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
UMass Dartmouth, Team S4-G1, Valliere Spring 2019 Member of UMass Dartmouth, Team S4-G1, Valliere Spring 2019
UMASSD-VALLIERE-S19S4G1
3 Members
60 Guides authored
