Introduction

If you want to change not working Hard Disk Drive (HDD) or you want to upgrade it, this manual will help you to do this.


Please SUBSCRIBE to my channel ツ

Video Overview

  1. Remove the battery. Remove the RAM Memory Cover. Remove the HDD Cover.
    • Remove the battery.

    • Remove the RAM Memory Cover.

    • Remove the HDD Cover.

  2. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  3. Remove the 4x screws and take out the HDD. Disconnect the SATA cable. The Hard Drive is held in the HDD Caddy by 4x screws.
    • Remove the 4x screws and take out the HDD.

    • Disconnect the SATA cable.

    • The Hard Drive is held in the HDD Caddy by 4x screws.

    • .

    • Did you do it successfully?

    • .

    • Please SUBSCRIBE to my channel ツ

Conclusion

To reassemble your device, follow these instructions in reverse order.

5 other people completed this guide.

ZFix

Member since: 12/09/2013

162,554 Reputation

304 Guides authored

Team

Master Techs Member of Master Techs

Community

280 Members

784 Guides authored

2 Comments

SSDs may not work. Tried two different ones already on one of these (a Crucial and an A-Data), and no luck. Not sure if it has to do with missing BIOS/UEFI options, or a whitelist of parts in said firmware.

Michael Adams - Reply

thanks for this info!

Michael Auß -

View Statistics:

Past 24 Hours: 2

Past 7 Days: 22

Past 30 Days: 128

All Time: 7,948