Introduction

You will need to assemble the proper tools shown in the first step of this guide before you continue forward.

This guide is meant to assist the reader with the proper steps to remove and replace the touchpad of the Compaq Evo N1000v device.

Parts

No parts required.

Image 1/1:
  • Remove the 6 screws as shown in the photo.

Add Comment

Image 1/1:
  • Push the front of the laptop upwards as the photo shows.

Add Comment

Image 1/1:
  • Rest the front end piece on the keyboard area.

Add Comment

Image 1/1:
  • Unscrew the 4 screws as shown in the photo.

Add Comment

Image 1/1:
  • Unplug the cable as shown in the photo.

Add Comment

Image 1/1:
  • Unlock the second cable shown in the photo by using the pointed tweezers to move the lock upward on both sides of the cable.

Add Comment

Image 1/1:
  • Unplug the cable you have just unlocked.

Add Comment

Image 1/1:
  • Remove the gray, metal case surrounding the touchpad.

Add Comment

Image 1/1: Repeat these steps in reverse order to install the new touchpad.
  • Remove the touchpad.

  • Repeat these steps in reverse order to install the new touchpad.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

ryan

Member since: 03/12/2014

470 Reputation

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 155