Introduction

If your Comfort Zone CZ6C loosely attaches onto surfaces, then this simple, two-step guide will help you replace the clamp.

  1. Turn the Comfort Zone CZ6C onto its backside.
    • Turn the Comfort Zone CZ6C onto its backside.

    • Locate the center hinge screw.

  2. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  3. With a Philips screwdriver, remove the center hinge screw. Once the center hinge screw is completely removed from its hole, detach the clamp from the Comfort Zone CZ6C. Once the center hinge screw is completely removed from its hole, detach the clamp from the Comfort Zone CZ6C.
    • With a Philips screwdriver, remove the center hinge screw.

    • Once the center hinge screw is completely removed from its hole, detach the clamp from the Comfort Zone CZ6C.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Samantha Galicinao

Member since: 04/07/2015

289 Reputation

2 Guides authored

Team

Cal Poly, Team 17-5, Forte Spring 2015 Member of Cal Poly, Team 17-5, Forte Spring 2015

CPSU-FORTE-S15S17G5

4 Members

5 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 6

All Time: 450