Introduction

This guide shows how to remove the antenna, volume and channel dials, and the exterior case.

  1. Look for the release button on the back of the radio. Press the button and pull down on the battery at the same time. The battery will come free. Press the button and pull down on the battery at the same time. The battery will come free.
    • Look for the release button on the back of the radio.

    • Press the button and pull down on the battery at the same time. The battery will come free.

  2. Twist the antenna counter-clockwise to unscrew it from the antenna jack.
    • Twist the antenna counter-clockwise to unscrew it from the antenna jack.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Pull up on the dials to remove them from the underlying pegs.
    • Pull up on the dials to remove them from the underlying pegs.

  5. Using a T15 Torx screwdriver, unscrew the two screws. Using a plastic opening tool, pry the internal case from the external case. Using a plastic opening tool, pry the internal case from the external case.
    • Using a T15 Torx screwdriver, unscrew the two screws.

    • Using a plastic opening tool, pry the internal case from the external case.

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 84