Introduction

With a few tools, a little bit of time, and a moderate degree of commitment, you can replace a damaged display on ComNet Ericsson Panther 600P.

  1. Look for the release button on the back of the radio.
    • Look for the release button on the back of the radio.

    • Press the button and pull down on the battery at the same time. The battery will come free.

    Add Comment

  2. Twist the antenna counter-clockwise to unscrew it from the antenna jack.
    • Twist the antenna counter-clockwise to unscrew it from the antenna jack.

    Add Comment

    • Pull up on the dials to remove them from the underlying pegs.

    Add Comment

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Using a T15 Torx screwdriver, unscrew the two screws.

    • Using a plastic opening tool, pry the internal case from the external case.

    Add Comment

    • Using the plastic opening tool, pry the case apart.

    Add Comment

    • The keypad chip is attached to the motherboard by a ribbon.

    • Pull ribbon with tweezers to detach from back panel.

    Add Comment

    • Screen will be attached by a ribbon.

    • Pull screen up and away from motherboard to detach.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Daniel

Member since: 01/13/2015

109 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 107