Fix Your Stuff Community Store

ColecoVision Controller Circuit Board Replacement

Introduction

The purpose of this guide is to show step-by-step instructions on how to replace the circuit board of a ColecoVision game controller.

What you need

  1. ColecoVision Controller Circuit Board Replacement, Controller Circuit Board: step 1, image 1 of 2 ColecoVision Controller Circuit Board Replacement, Controller Circuit Board: step 1, image 2 of 2

    • Unplug the controller from the game console.

    Edit

  2. ColecoVision Controller Circuit Board Replacement: step 2, image 1 of 2 ColecoVision Controller Circuit Board Replacement: step 2, image 2 of 2

    • Place the controller with the back panel up (buttons down).

    • Remove the five 15mm screws on the back with a Phillips #1 screwdriver.

    Edit

  4. ColecoVision Controller Circuit Board Replacement: step 3, image 1 of 1

    • Turn the device around.

    • Separate the front panel from the rest of the controller and set aside.

    Edit

  5. ColecoVision Controller Circuit Board Replacement: step 4, image 1 of 2 ColecoVision Controller Circuit Board Replacement: step 4, image 2 of 2

    • Remove the tape and wiring holding the wires in place.

    • Carefully lift the circuit board out of the controller.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 2 other contributors

Juin Yeh

Member since: 10/17/18

205 Reputation

2 Guides authored

Badges: 3

Team

UW Tacoma, Team S1-G2, Rose Fall 2018 Member of UW Tacoma, Team S1-G2, Rose Fall 2018

UWT-ROSE-F18S1G2

4 Members

12 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 9

Past 30 Days: 18

All Time: 1,002