Introduction

Be careful not to crack the faceplate or the screen of this tablet with the spudger. Take care not to break the motherboard when removing it from the plastic housing.

Image 1/3: Carefully pry the faceplate away from the body of the tablet. Image 2/3: Carefully pry the faceplate away from the body of the tablet. Image 3/3: Carefully pry the faceplate away from the body of the tablet.
  • Wedge the metal spudger in between the faceplate and the body of the tablet.

  • Carefully pry the faceplate away from the body of the tablet.

Add Comment

Image 1/1:
  • Carefully lift the screen and set it face down on a soft surface to not scratch it.

Add Comment

Image 1/2: Image 2/2:
  • Remove the 4 3.8mm phillips #000 screws holding on the motherboard using the PH000 phillips head.

Add Comment

Image 1/1:
  • Remove the 2 ribbons from the motherboard by pulling the black connections out of the white connections on the motherboard.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Daniel Ulrich

Member since: 09/29/2016

470 Reputation

3 Guides authored

Team

IUPUI, Team 3-4, Harley Fall 2016 Member of IUPUI, Team 3-4, Harley Fall 2016

IUPUI-HARLEY-F16S3G4

4 Members

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 173