Introduction

Use this guide to remove the Chumby One's rear cover.

Image 1/2: Use a spudger to remove the plastic feet. Image 2/2: Unscrew the four Phillips screws using a #00 Phillips screwdriver.
  • Be careful when taking apart this device.

  • Use a spudger to remove the plastic feet.

  • Unscrew the four Phillips screws using a #00 Phillips screwdriver.

Add Comment

Image 1/2: Image 2/2:
  • Remove the rear cover from the device.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Student Jones

Member since: 01/14/2010

48 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 1,472