Chumby One Chassis Removal - iFixit Repair Guide

Free Shipping on Domestic Orders $75+

Introduction

Prerequisite Guide Only

What you need

1. Step 1 Chassis
  Remove 4 self-adhesive plastic dots covering the screw holes.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
2. Step 2
  Remove the four 2mm screws with a Phillips screwdriver.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
3. Step 3
  Remove the back and bottom cover.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
5. Step 4
  Disconnect the battery connector from the motherboard with a plastic opening tool.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
6. Step 5
  Disconnect the microphone connector from the motherboard with a plastic opening tool.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
7. Step 6
  Remove the display ribbon cable from its socket with a plastic opening tool.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
8. Step 7
  Remove the volume knob from the side of the Chumby One with a plastic opening tool.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
9. Step 8
  Remove the four 6mm screws using a PH000 bit on the inner chassis.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
10. Step 9
  Remove the inner components from the outer shell.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

with 2 other contributors

Jordan Houchins

Member since: 03/27/17

401 Reputation

4 Guides authored

Team

IUPUI, Team S3-G3, Baechle Spring 2017 Member of IUPUI, Team S3-G3, Baechle Spring 2017

IUPUI-BAECHLE-S17S3G3

4 Members

48 Guides authored

0 Guide Comments

View Statistics:

Past 24 Hours: 1

Past 7 Days: 4

Past 30 Days: 15

All Time: 115