Introduction

The screen will need to be replaced if there are pixels on the screen, a blue screen, or no display. There are no hazards accompanied with this task.

Image 1/2: Image 2/2:
  • Remove the bezel with a plastic spudger.

Add Comment

Image 1/2: Image 2/2:
  • Remove four screws - one in each corner along the screen.

Add Comment

Image 1/2: Image 2/2:
  • Remove Screen by gently pulling it out and then lifting it up.

Add Comment

Image 1/2: Image 2/2:
  • Remove the LCD data cable which will allow the screen to be removed completely.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 6

Past 30 Days: 22

All Time: 83