Conair Infiniti Pro Model 259NP Back Panel Replacement
Timothy Lo and 4 other contributors
Last updated on Jan 10, 2025
Views: 7.3K
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 28
- Past 30 Days:
- 120
- All Time:
- 7,294
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 6 7
6 people have marked this guide "completed." Will you be next?
7 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓In order to replace any internal parts, you first need to take off the back panel of the hair dryer. This guide will show you how to do that.
What you need
Tools
-
-
-
Hold the hair dryer by the handle so that the back panel faces up.
Ask FixBot
-
-
-
-
Starting from where the cord attaches to the handle, pull apart the two plastic panels.
-
Continue separating the back panel, working along the seam.
-
With moderate force, completely remove the back panel from the hair dryer.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
6 other people completed this guide.
Team
Cal Poly, Team 10-58, Amido Spring 2014 Member of Cal Poly, Team 10-58, Amido Spring 2014
CPSU-AMIDO-S14S10G58
4 Members
84 Guides authored
