Step 1 Battery CR2032

• To open the remote control you need a circlip caliper (in german: Seegerringzange ;).
• The forks of the tool are moving away from each other, when you pull the handles together
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 2

• Place the tool in the indentation.
• The forks moving direction has to be perpendicular to the gap of the case .
• prie one side open then do the same on the other side
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 3
• Remove the spent battery with the nonconductive spudger tool
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 4
• Place the new battery in the mounting
• Check Polarity! Negative pole is facing you.
• Carefully put the case together
• Cover old battery with duct tape and take care of the disposal.
• Be happy an drive safely, because you're done!
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

<iframe id="dozuki-embed-132125" src="https://www.ifixit.com/Guide/embed/132125/full" width="800" allowfullscreen frameborder="0"></iframe> <script>window.addEventListener("message",function(a){var b=document.getElementById("dozuki-embed-132125"),c=a.data[0],d=a.data[1];switch(c){case"setHeight":b.style.height=d+"px"}},!1);</script> <iframe src="https://www.ifixit.com/Guide/embed/132125" width="800" height="584" allowfullscreen frameborder="0"></iframe>

Preview