Fix Your Stuff Community Store

Cassida Counterfeit Detector Motor Band Replacement

What you need

  1. Careful: steps 1-6 are sourced from a guide that's marked as in-progress.

    Cassida Counterfeit Detector Motor Band Replacement, Cassida Counterfeit Detector Disassembly: step 1, image 1 of 1

    • Remove the rubber legs.

    Edit

  2. Cassida Counterfeit Detector Motor Band Replacement: step 2, image 1 of 1

    • Using a Phillips #1 bit, remove the circled screws.

    Edit

  3. Cassida Counterfeit Detector Motor Band Replacement: step 3, image 1 of 1

    • Pry the top cover off, starting from the side with the switch, with a metal spudger.

    Edit

  5. Cassida Counterfeit Detector Motor Band Replacement: step 4, image 1 of 1

    • Pop the 4 tabs on the top of the machine up with a metal spudger and then remove the 2 side panels.

    Edit

  6. Cassida Counterfeit Detector Motor Band Replacement: step 5, image 1 of 1

    • Disconnect the wires circled and then remove the top section from the bottom section just by pulling the top section straight up and holding onto the bottom.

    Edit

  7. Cassida Counterfeit Detector Motor Band Replacement: step 6, image 1 of 1

    • All the parts disassembled.

    Edit

  8. Cassida Counterfeit Detector Motor Band Replacement, Motor Band: step 7, image 1 of 1

    • This is the band you will be replacing. If it is broken or loose, remove from the device completely.

    Edit

  9. Cassida Counterfeit Detector Motor Band Replacement: step 8, image 1 of 1

    • Install new band by placing it around the small grey pulley and then working it around the larger black pulley.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 59