Cassida Counterfeit Detector LCD Display Replacement - iFixit Repair Guide

Free Shipping on Domestic Orders $75+

What you need

1. Step 1 Cassida Counterfeit Detector
  Remove the rubber legs.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
2. Step 2
  Using a Phillips #1 bit, remove the circled screws.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
3. Step 3
  Pry the top cover off, starting from the side with the switch, with a metal spudger.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
5. Step 4
  Pop the 4 tabs on the top of the machine up with a metal spudger and then remove the 2 side panels.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
6. Step 5
  Disconnect the wires circled and then remove the top section from the bottom section just by pulling the top section straight up and holding onto the bottom.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
7. Step 6
  All the parts disassembled.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
1. Step 7 The LCD Display
  Remove the two screws on the underside of the top case with a Phillips #1 screwdriver.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024
2. Step 8
  This is the LCD detached. Install your new LCD display with the two screws and then plug the connector back into the motherboard.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

One other person completed this guide.

Author

with 3 other contributors

TREVOR j NELMS

Member since: 10/30/19

543 Reputation

4 Guides authored

Team

University of Memphis, Team S2-G2, Kim Fall 2019 Member of University of Memphis, Team S2-G2, Kim Fall 2019

UM-KIM-F19S2G2

4 Members

60 Guides authored

0 Guide Comments

View Statistics:

Past 24 Hours: 2

Past 7 Days: 13

Past 30 Days: 47

All Time: 291