Introduction
After removing the battery and motherboard from your device you will be able to simply remove the camera from the mother board after following the steps provided.
What you need
-
-
First, you are going to want to take out the two front screws from the device.
-
The screws are 4mm in length and require a Y0 bit to remove
-
-
-
-
In order to remove the camera, carefully disconnect the wires with the metal spudger.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.