Introduction

This guide shows how to remove the back case of the camera to replace a damaged back case or access the inner parts of the camera.

Parts

No parts required.

Locate 12 screws. Four on the left, four on the right, and four on the bottom. Locate 12 screws. Four on the left, four on the right, and four on the bottom. Locate 12 screws. Four on the left, four on the right, and four on the bottom.
  • Locate 12 screws. Four on the left, four on the right, and four on the bottom.

Add Comment

Using the #00 Phillips screwdriver, remove the four 3.66mm screws from the bottom outer case, and the eight 1.75mm screw from the sides of the case.
  • Using the #00 Phillips screwdriver, remove the four 3.66mm screws from the bottom outer case, and the eight 1.75mm screw from the sides of the case.

Add Comment

Deck the Halls
With tools and Fix Kits
Separate the front case from the body of the camera.
  • Separate the front case from the body of the camera.

Add Comment

Separate the back case from the body of the camera.
  • Separate the back case from the body of the camera.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Laura

Member since: 04/19/2012

31 Reputation

2 Guides authored

Team

Cal Poly, Team 9-45, Regan Spring 2012 Member of Cal Poly, Team 9-45, Regan Spring 2012

CPSU-REGAN-S12S9G45

7 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 405