Introduction

How to replace the axles.

  1. Flip the car with the bottom side facing up.
    • Flip the car with the bottom side facing up.

    • Using a Philips screwdriver, remove the middle screw on the front axle while holding it the axle in place.

    • Carefully place the screw in a magnetic pad (or somewhere you won’t loose)

    Add Comment

  2. Place the new axle where on the curved side is pointed towards center.
    • Place the new axle where on the curved side is pointed towards center.

    • Screw it into place but make sure it isn't too tight. The axle needs to able to move a bit.

    Add Comment

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Repeat the same steps for the back axle of the car but without concern of the curved part.

    Add Comment

    • Place the new wheel into the car and attach the new screw

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Kimberly Santos

Member since: 09/25/2017

328 Reputation

3 Guides authored

Team

USF Tampa, Team S3-G5, Cannon Fall 2017 Member of USF Tampa, Team S3-G5, Cannon Fall 2017

USFT-CANNON-F17S3G5

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 8

All Time: 120