Introduction

We will be explaining how to replace the hand strap in the Canon Vixia HF20 Camcorder.

Un-velcro the camcorder strap. Remove the strap from the first hole by pulling towards the front of the camcorder, continue pulling the strap through until it is removed from second anchor point as well. There should now be two empty anchor points.
  • Un-velcro the camcorder strap.

  • Remove the strap from the first hole by pulling towards the front of the camcorder, continue pulling the strap through until it is removed from second anchor point as well.

  • There should now be two empty anchor points.

Add Comment

Re-insert the new Velcro strap through the back anchor hole in the direction of the arrow (toward the battery end of the camcorder). Then through the padded hand strap in direction of the arrow. Lastly, pull the strap through the front anchor hole adjusting for your grip.
  • Re-insert the new Velcro strap through the back anchor hole in the direction of the arrow (toward the battery end of the camcorder).

  • Then through the padded hand strap in direction of the arrow.

  • Lastly, pull the strap through the front anchor hole adjusting for your grip.

Add Comment

Once the fit is adjusted, secure by closing the padded strap.
  • Once the fit is adjusted, secure by closing the padded strap.

Add Comment

Finish Line

Taylor Morris

Member since: 03/05/2015

216 Reputation

2 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 133