Skip to main content

Canon Powershot SX500 IS Back Cover Replacement

What you need

  1. Canon Powershot SX500 IS Back Cover Replacement, Battery: step 1, image 1 of 1
    • Rotate the camera to expose the underside of the camera.

  2. Canon Powershot SX500 IS Back Cover Replacement: step 2, image 1 of 1
    • Slide the rounded rectangle tab to the left to release the battery cover.

  3. Canon Powershot SX500 IS Back Cover Replacement: step 3, image 1 of 1
    • Push the small orange tab forward to release the battery (Battery is ready for removal).

  4. Canon Powershot SX500 IS Back Cover Replacement, Back Cover: step 4, image 1 of 3 Canon Powershot SX500 IS Back Cover Replacement, Back Cover: step 4, image 2 of 3 Canon Powershot SX500 IS Back Cover Replacement, Back Cover: step 4, image 3 of 3
    • Using the Phillips 00 screwdriver, remove the two 4mm top screws above the LCD screen.

  5. Canon Powershot SX500 IS Back Cover Replacement: step 5, image 1 of 1
    • Using the Phillips 00 screwdriver, remove the two 4mm side screws to the left of the LCD screen.

  6. Canon Powershot SX500 IS Back Cover Replacement: step 6, image 1 of 1
    • Using the Phillips 00 screwdriver, remove the two 4mm side screws to the left of the LCD screen.

  7. Canon Powershot SX500 IS Back Cover Replacement: step 7, image 1 of 1
    • Using the Phillips 00 screwdriver, remove the three 4mm screws from the underside of the camera.

  8. Canon Powershot SX500 IS Back Cover Replacement: step 8, image 1 of 2 Canon Powershot SX500 IS Back Cover Replacement: step 8, image 2 of 2
    • Using the plastic pry tool, remove the back cover from camera.

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 5

All Time: 479