Parts

No parts required.

Image 1/1:
  • Open the protective door on the bottom of the camera, and remove the SD card and battery from the camera

Add Comment

Image 1/2: Image 2/2:
  • Unscrew the two 2mm screws from the inside of the case

Add Comment

Image 1/2: To replace, hold the plastic backing to the metal hinge and screw the plate onto the front of it Image 2/2: To replace, hold the plastic backing to the metal hinge and screw the plate onto the front of it
  • Remove the plastic backing and the metal front plate from the spring controlled hinge

  • To replace, hold the plastic backing to the metal hinge and screw the plate onto the front of it

Add Comment

Conclusion

That's It! Good Job!

Ellis DeVoe

Member since: 04/14/2015

557 Reputation

5 Guides authored

Team

Cal Poly, Team 5-12, Maness Spring 2015 Member of Cal Poly, Team 5-12, Maness Spring 2015

CPSU-MANESS-S15S5G12

4 Members

5 Guides authored

One Comment

What if the existing hinge is broken.....I need to replace the entire door and spring loaded hinge. Ya got instructions for that?

jusanotherhuman - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 9

All Time: 199