Fix Your Stuff Community Store

Canon Powershot SX10 IS Lithium Ion Battery Replacement

Introduction

The lithium battery (CR1220) needs to be replaced when the date and time stamp will not stay set, or the camera is still prompting the user to change the batteries after the AA batteries have been replaced.

What you need

  1. Canon Powershot SX10 IS Lithium Ion Battery Replacement, Lithium Ion Battery: step 1, image 1 of 1

    • Open the door. Release the catch by sliding it towards the side of the camera.

    • Then slide the door towards the front of the camera.

    Edit

  3. Canon Powershot SX10 IS Lithium Ion Battery Replacement: step 2, image 1 of 3 Canon Powershot SX10 IS Lithium Ion Battery Replacement: step 2, image 2 of 3 Canon Powershot SX10 IS Lithium Ion Battery Replacement: step 2, image 3 of 3

    • Remove AA batteries.

    • Using a fingernail or iFixit opening tools to pry up the battery cradle.

    • Remove CR1220 battery from the cradle.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

4 other people completed this guide.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 14

Past 30 Days: 60

All Time: 3,295