Introduction
Disassemble the back cover in order to open the camera and access the inside components.
What you need
-
-
Turn the camera to the side that has the screen. Unnscrew the two black 3.4 mm screws with a #00 Phillips screwdriver.
-
Unscrew the two black 3.4 mm screws with a #00 Phillips screwdriver.
-
-
-
Put the camera with the lens facing up, turn it to the side where the DC IN A/V OUT DIGITAL Cover and lanyard attachment are located.
-
Unscrew the black 3.4 mm screws with a #00 Phillips screwdriver.
-
-
-
Put the camera with the lens facing up, turn it to the side where the Cover battery is located.
-
Unscrew the black 3.4 mm screws with a #00 Phillips screwdriver.
-
-
-
-
Put the camera with the lens facing up, turn it to the side where the compartment of the battery (CR1220) for time/date is located.
-
Unscrew the black 3.4 mm screws with a #00 Phillips screwdriver.
-
-
-
Put the camera with the lens facing down, turn it to the side where the DC IN A/V OUT DIGITAL Cover and the silver lanyard attachment are located.
-
Open the DC IN A/V OUT DIGITAL cover.
-
Unscrew the black 3.4 mm screws with a #00 Phillips screwdriver.
-
-
-
Turn the camera with the lens facing down.
-
Use the blue opening tool to make lever. Insert the opening tool in the seam where the front case and the back case assemble.
-
Keep making pressure and slowly slide the opening tool through all the gap.
-
There is one point when the cover will disassemble completely.
-
-
-
This is a final picture of how it's going to look when you disassemble the back cover.
-
You will have 3 parts:
-
1. The camera
-
2. The DC IN A/V OUT DIGITAL Cover
-
3. The back cover.
-