Fix Your Stuff Community Store

Canon PowerShot SD800 IS LCD Assembly Replacement

Introduction

Remove the back cover before removing LCD.

What you need

  1. Canon PowerShot SD800 IS LCD Assembly Replacement, Back Cover: step 1, image 1 of 1

    • Remove one 2.25mm screw on the bottom.

    Edit

  2. Canon PowerShot SD800 IS LCD Assembly Replacement: step 2, image 1 of 1

    • Remove two 2.25mm screws on the right side looking from the front.

    Edit

  3. Canon PowerShot SD800 IS LCD Assembly Replacement: step 3, image 1 of 1

    • Remove one 4.7mm screw on the side with the AV output.

    Edit

  5. Canon PowerShot SD800 IS LCD Assembly Replacement: step 4, image 1 of 1

    • Pull off the back cover.

    • The back cover tends to stick in the top corner (near the mode dial) due to a metal clip. Jiggle the cover side to side as you pull it out.

    Edit

  6. Canon PowerShot SD800 IS LCD Assembly Replacement, LCD Assembly: step 5, image 1 of 1

    • Remove 2 2.4mm screws on bottom.

    Edit

  7. Canon PowerShot SD800 IS LCD Assembly Replacement: step 6, image 1 of 1

    • Follow the small data cable to where it connects to the camera.

    • Lift the back white portion to unlock the cable.

    • The cable should easily slide out.

    • The connector is very fragile. Use caution when lifting the lock.

    Edit

  8. Canon PowerShot SD800 IS LCD Assembly Replacement: step 7, image 1 of 1

    • Gently lift LCD display off.

    • There will be two data cables still attached to the camera. Do not break them.

    • There may be a loose strip of metal along the inner side of the LCD display for a secure fit.

    Edit

  9. Canon PowerShot SD800 IS LCD Assembly Replacement: step 8, image 1 of 1

    • Follow the larger cable to where it connects to the camera.

    • Lift the front black portion of the connector to unlock the data cable.

    • The cable should easily slide out.

    • The connector is very fragile. Use caution when lifting the lock.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Author

with 5 other contributors

Jeremy Rabaino

Member since: 10/10/10

135 Reputation

6 Guides authored

Badges: 7

+4 more badges

Team

Cal Poly, Team 20-9, Maness Fall 2010 Member of Cal Poly, Team 20-9, Maness Fall 2010

CPSU-MANESS-F10S20G9

5 Members

13 Guides authored

1 Guide Comment

where can I buy a replacement LCD screen for a SD800 IS

ALFRED - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 8

All Time: 2,449