Introduction

This guide will show you how to properly replace a faulty shutter button.

Parts

No parts required.

Remove the two 2mm J00 screws on the right exterior. Remove a single 4 mm J00 on the bottom exterior. Remove a single 3mm J00 on the left exterior.
  • Remove the two 2mm J00 screws on the right exterior.

  • Remove a single 4 mm J00 on the bottom exterior.

  • Remove a single 3mm J00 on the left exterior.

Add Comment

Once the front shell of the camera is removed the back shell should slide off just the same.
  • Once the front shell of the camera is removed the back shell should slide off just the same.

Add Comment

Use your Heavy-Duty Spudger to remove your faulty shutter piece.
  • Use your Heavy-Duty Spudger to remove your faulty shutter piece.

Add Comment

Insert Heavy-Duty Spudger under shutter button to release shutter button.
  • Insert Heavy-Duty Spudger under shutter button to release shutter button.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Clayton

Member since: 03/20/2017

501 Reputation

5 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 29