Parts

No parts required.

Image 1/2: One screw is on upper right corner of the back panel. Image 2/2: The other four screws are on the bottom of the camera.
  • Unscrew five Phillips screws using a #0 Phillips screwdriver.

  • One screw is on upper right corner of the back panel.

  • The other four screws are on the bottom of the camera.

Add Comment

Image 1/1: Remove the memory card from the slot.
  • Open memory card cover by moving the slide switch toward the top end of of the camera.

  • Remove the memory card from the slot.

Add Comment

Image 1/1: This may require gentle rocking of the case to free it.
  • Remove the rear cover from the rest of the camera.

  • This may require gentle rocking of the case to free it.

Add Comment

Image 1/2: Image 2/2:
  • Unscrew the four Philips screws from the side of the casing and one screw from the bottom using a #0 Phillips screwdriver.

Add Comment

Image 1/1: The cover may require gentle rocking to remove.
  • Free the front cover from the rest of the camera.

  • The cover may require gentle rocking to remove.

Add Comment

Finish Line

One other person completed this guide.

Nathan Balcom

Member since: 01/21/2010

81 Reputation

8 Guides authored

Team

Cal Poly, Team 16-28, Maness Winter 2010 Member of Cal Poly, Team 16-28, Maness Winter 2010

CPSU-MANESS-W10S16G28

4 Members

9 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 2

All Time: 1,427