Skip to main content

Introduction

Replacing the retaining bar takes little effort. If the bar has become cracked or similarly broken, then it will need to be replaced.

In this guide, you will learn how to replace the retaining bar and quickly resume the use of your wrist strap.

Parts

No parts specified.

  1. Hold the camera so the retaining bar is visible.
    • Hold the camera so the retaining bar is visible.

  2. There is one screw on the left and right sides of the retaining bar. Using a Phillips-head #00, unscrew each.
    • There is one screw on the left and right sides of the retaining bar. Using a Phillips-head #00, unscrew each.

  3. Remove the current bar and insert its replacement.
    • Remove the current bar and insert its replacement.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Alexandra Millett

Member since: 02/23/2015

282 Reputation

2 Guides authored

Team

USF Tampa, Team 1-5, Leahy Winter 2015 Member of USF Tampa, Team 1-5, Leahy Winter 2015

USFT-LEAHY-W15S1G5

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 5

All Time: 1,060