Introduction

Replacing the Canon-PowerShot G12 HDMI port is a highly-invasive step-intensive process that becomes necessary if the HDMI port sustains damage due to a crack, water, or jams, or if the HDMI port no longer functions properly.

In this guide, you will learn how to replace the HDMI port carefully without damaging any essential internal components.

  1. Open the back cover of the camera, see steps 1-6 in Canon PowerShot G12 Rear Function Setting Dial Replacement

    Add Comment

  2. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
  3. On the right side of the camera looking from the back, locate the HDMI port and use a spudger to remove it.
    • On the right side of the camera looking from the back, locate the HDMI port and use a spudger to remove it.

    Add Comment

    • Insert the new HDMI port until you hear a click on both sides, ensuring the holes match up with the ports on the camera.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Nathan Meuwissen

Member since: 02/23/2015

484 Reputation

3 Guides authored

Team

USF Tampa, Team 1-5, Leahy Winter 2015 Member of USF Tampa, Team 1-5, Leahy Winter 2015

USFT-LEAHY-W15S1G5

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 24

All Time: 1,120