Introduction

The LCD screen can be removed in order to be replaced on the camera with 10 steps, which include unscrewing the cover plates off of the camera to get to the screen itself.

Parts

No parts required.

Use the Phillips #000 screwdriver from the iFixit tool kit to unscrew the two image stabilizer panel’s 2 mm Phillips head screws.
  • Use the Phillips #000 screwdriver from the iFixit tool kit to unscrew the two image stabilizer panel’s 2 mm Phillips head screws.

  • Using your hands, remove the image stabilizer panel.

Add Comment

Unscrew the two 4 mm Phillips head screws from the bottom side of the camera. Unscrew the two 4 mm Phillips head screws from the bottom side of the camera.
  • Unscrew the two 4 mm Phillips head screws from the bottom side of the camera.

Add Comment

Using your hand, open the battery portal located on the bottom left of the camera. The screw is in the bottom left of the battery portal. Unscrew the hidden 4mm Phillips head screw inside the battery portal.
  • Using your hand, open the battery portal located on the bottom left of the camera. The screw is in the bottom left of the battery portal.

  • Unscrew the hidden 4mm Phillips head screw inside the battery portal.

Add Comment

Remove the HDMI side panel with your hands. Unscrew the four 4 mm Phillips head screws from the inside of the camera.
  • Remove the HDMI side panel with your hands.

  • Unscrew the four 4 mm Phillips head screws from the inside of the camera.

Add Comment

Black Friday
Broken doesn't stand a chance.
The back side of the camera should pop off or be removed by hand.
  • The back side of the camera should pop off or be removed by hand.

Add Comment

Unscrew the one 3 mm Phillips head screw on the top of the camera. Unscrew the one 3 mm Phillips head screw on the top of the camera.
  • Unscrew the one 3 mm Phillips head screw on the top of the camera.

Add Comment

Manually remove the front panel from the camera.
  • Manually remove the front panel from the camera.

Add Comment

Using your hands, remove the metal piece (surrounding the right side of the screen) from the right side of the camera. Using your hands, remove the metal piece (surrounding the right side of the screen) from the right side of the camera.
  • Using your hands, remove the metal piece (surrounding the right side of the screen) from the right side of the camera.

Add Comment

Using your hands, lift up the screen.
  • Using your hands, lift up the screen.

  • The screen is fragile!

Add Comment

The strip tears easily! Manually lift the shutter button plate and remove the white ZIF connector, which is the white clasp underneath. On the front of the camera, using your fingers, undo the orange ribbon from the gray clasp and pull the ribbon through the shutter deck.
  • The strip tears easily!

  • Manually lift the shutter button plate and remove the white ZIF connector, which is the white clasp underneath.

  • On the front of the camera, using your fingers, undo the orange ribbon from the gray clasp and pull the ribbon through the shutter deck.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Kadie Aldridge

Member since: 09/23/2015

207 Reputation

2 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 11

All Time: 387