Parts

No parts required.

  1. Open the battery door by sliding the tab on the battery door while pushing the battery door away from the camera. Remove batteries.
    • Open the battery door by sliding the tab on the battery door while pushing the battery door away from the camera.

    • Remove batteries.

  2. Remove the three indicated .2mm screws using a Phillips #00 screwdriver. Gently pull off side-panel to remove it.
    • Remove the three indicated .2mm screws using a Phillips #00 screwdriver.

    • Gently pull off side-panel to remove it.

  3. Remove the two indicated .2mm screws using a Phillips #00 screwdriver.
    • Remove the two indicated .2mm screws using a Phillips #00 screwdriver.

  4. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  5. Remove the indicated .2mm screw using a Phillips #00 screwdriver. Remove the three .2mm screws located on the internal side of the top panel within the battery chamber using a Phillips #00 screwdriver.
    • Remove the indicated .2mm screw using a Phillips #00 screwdriver.

    • Remove the three .2mm screws located on the internal side of the top panel within the battery chamber using a Phillips #00 screwdriver.

  6. Open 'DIGITAL A/V OUT' door on camera. Remove the two indicated .2mm screws using a Phillips #00 screwdriver.
    • Open 'DIGITAL A/V OUT' door on camera.

    • Remove the two indicated .2mm screws using a Phillips #00 screwdriver.

  7. Grip the sides of the top panel and gently pull to separate the top panel from the camera body.
    • Grip the sides of the top panel and gently pull to separate the top panel from the camera body.

    • The top panel will not completely detach.

  8. Gently pull the front and back panels apart, and use a Phillips #00 screwdriver to remove the screw connecting the panels. Gripping the top and bottom, gently pull the front panel away from the camera body to remove it.
    • Gently pull the front and back panels apart, and use a Phillips #00 screwdriver to remove the screw connecting the panels.

    • Gripping the top and bottom, gently pull the front panel away from the camera body to remove it.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Kelly Duggan

Member since: 10/13/2014

439 Reputation

3 Guides authored

Team

Clemson, Team 2-5, Benson Fall 2014 Member of Clemson, Team 2-5, Benson Fall 2014

CLEM-BENSON-F14S2G5

4 Members

9 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 4

All Time: 422