Parts

No parts required.

Image 1/2: Turn the camera upside-down and press the tab to release the battery cover. Remove the batteries. Image 2/2: Turn the camera upside-down and press the tab to release the battery cover. Remove the batteries.
  • Turn off the camera.

  • Turn the camera upside-down and press the tab to release the battery cover. Remove the batteries.

Add Comment

Image 1/1: Use a Phillips head #000 screwdriver to remove the three (3) 4.0 mm screws.
  • Turn the camera upside down to view the "Card/Batt. Open" Cover.

  • Use a Phillips head #000 screwdriver to remove the three (3) 4.0 mm screws.

Add Comment

Image 1/1: Remove the one (1) 5.0 mm screw with the Phillips head #000 screwdriver.
  • Open "Card/Batt. Open" Cover.

  • Remove the one (1) 5.0 mm screw with the Phillips head #000 screwdriver.

Add Comment

Image 1/1: Remove the three (3) 4.0 mm screws with the Phillips head #000 screwdriver.
  • Turn the camera to the right side of the LCD screen.

  • Remove the three (3) 4.0 mm screws with the Phillips head #000 screwdriver.

Add Comment

Image 1/3: Start at the bottom at the corner of the "Card/Batt. Open" Cover. Image 2/3: Then move onto the other edges and the top. Image 3/3: It may be tight at the top!
  • Gently remove the back cover.

    • Start at the bottom at the corner of the "Card/Batt. Open" Cover.

    • Then move onto the other edges and the top.

  • It may be tight at the top!

Add Comment

Image 1/2: Remove the lens guard. Image 2/2: Press the lens guard's button as you turn the guard counterclockwise.
  • Turn the camera to view the front.

  • Remove the lens guard.

    • Press the lens guard's button as you turn the guard counterclockwise.

Add Comment

Image 1/1: Remove the one (1) 4.0 mm screw with the Phillips head #000 screwdriver.
  • Turn the camera to the side left of the LCD screen.

  • Remove the one (1) 4.0 mm screw with the Phillips head #000 screwdriver.

Add Comment

Image 1/1: When removing the front cover, a thin, black rubber washer may fall off the lens. If it does, make sure to put it back on the lens before reassembly.
  • Remove the front cover gently.

  • When removing the front cover, a thin, black rubber washer may fall off the lens. If it does, make sure to put it back on the lens before reassembly.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Carley Fuller

Member since: 03/23/2015

317 Reputation

3 Guides authored

Team

Baylor, Team 7-12, Williams Spring 2015 Member of Baylor, Team 7-12, Williams Spring 2015

BU-WILLIAMS-S15S7G12

3 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 7

Past 30 Days: 12

All Time: 369