Parts

No parts required.

Turn off the camera. Turn the camera upside-down and press the tab to release the battery cover. Remove the batteries.
  • Turn off the camera.

  • Turn the camera upside-down and press the tab to release the battery cover. Remove the batteries.

Add Comment

Turn the camera upside down to view the "Card/Batt. Open" Cover.
  • Turn the camera upside down to view the "Card/Batt. Open" Cover.

  • Use a Phillips head #000 screwdriver to remove the three (3) 4.0 mm screws.

Add Comment

Open "Card/Batt. Open" Cover.
  • Open "Card/Batt. Open" Cover.

  • Remove the one (1) 5.0 mm screw with the Phillips head #000 screwdriver.

Add Comment

Turn the camera to the right side of the LCD screen.
  • Turn the camera to the right side of the LCD screen.

  • Remove the three (3) 4.0 mm screws with the Phillips head #000 screwdriver.

Add Comment

Gently remove the back cover. Start at the bottom at the corner of the "Card/Batt. Open" Cover. Then move onto the other edges and the top.
  • Gently remove the back cover.

    • Start at the bottom at the corner of the "Card/Batt. Open" Cover.

    • Then move onto the other edges and the top.

  • It may be tight at the top!

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Carley Fuller

Member since: 03/23/2015

317 Reputation

3 Guides authored

Team

Baylor, Team 7-12, Williams Spring 2015 Member of Baylor, Team 7-12, Williams Spring 2015

BU-WILLIAMS-S15S7G12

3 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 6

All Time: 327