Introduction

Using these instructions, we'll make it easy and simple for you to replace the LCD in your Canon camera.

Parts

No parts required.

Locate the battery cover at the bottom of the camera.
  • Locate the battery cover at the bottom of the camera.

  • Pull down on the black tab to open the cover.

Add Comment

Push the grey tab on the right side of the battery.
  • Push the grey tab on the right side of the battery.

  • Remove the battery from the slot.

Add Comment

Black Friday
Broken doesn't stand a chance.
Remove the six screws on the housing of the LCD. Four 3.1mm Phillips screws on the side with the hinge. Two 2.7mm Phillips screws
  • Remove the six screws on the housing of the LCD.

    • Four 3.1mm Phillips screws on the side with the hinge.

    • Two 2.7mm Phillips screws

Add Comment

Remove the plastic back of the LCD.
  • Remove the plastic back of the LCD.

Add Comment

Unplug the blue cable attached to the back of the LCD. Unplug the blue cable attached to the back of the LCD.
  • Unplug the blue cable attached to the back of the LCD.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

4 other people completed this guide.

Jordan Rabold

Member since: 04/14/2014

571 Reputation

4 Guides authored

Team

Cal Poly, Team 12-33, Maness Spring 2014 Member of Cal Poly, Team 12-33, Maness Spring 2014

CPSU-MANESS-S14S12G33

4 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 4

Past 7 Days: 16

Past 30 Days: 76

All Time: 3,055