Introduction

Use this guide to replace the battery door on your Canon EOS 40D.

Tools

No tools required.

Parts

After removing the battery, place your index finger between the inner section of the battery door and the battery compartment as shown in the photo.
  • After removing the battery, place your index finger between the inner section of the battery door and the battery compartment as shown in the photo.

  • Then place your thumb slightly above the battery door hinge.

Add Comment

With your thumb, gently press down on the battery door and rotate the battery door clockwise. The upper hinge will pop out and then the lower hinge will pop out. With your thumb, gently press down on the battery door and rotate the battery door clockwise. The upper hinge will pop out and then the lower hinge will pop out.
  • With your thumb, gently press down on the battery door and rotate the battery door clockwise. The upper hinge will pop out and then the lower hinge will pop out.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Doug Kruse

Member since: 09/03/2015

498 Reputation

3 Guides authored

Team

USF Tampa, Team 12-3, Blackwell Fall 2015 Member of USF Tampa, Team 12-3, Blackwell Fall 2015

USFT-BLACKWELL-F15S12G3

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 5

Past 30 Days: 21

All Time: 462