Introduction

Removing the front panel is the first step to accessing many internal components. Removal is safe, simple, and only requires a screwdriver.

Remove the two 4.8 mm black screws above the lens on the front of the camera.
  • Remove the two 4.8 mm black screws above the lens on the front of the camera.

Add Comment

Remove the 4.3 mm black screw under the lens ring, and the 4.8 mm black screw under the camera.
  • Remove the 4.3 mm black screw under the lens ring, and the 4.8 mm black screw under the camera.

Add Comment

  • Remove the 4.8 mm black screw on the left side of the camera.

Add Comment

  • Remove the front panel by lifting it away from the camera's body.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Sterling Vinson

Member since: 04/17/2011

216 Reputation

5 Guides authored

Team

Cal Poly, Team 8-8, Regan Spring 2011 Member of Cal Poly, Team 8-8, Regan Spring 2011

CPSU-REGAN-S11S8G8

5 Members

11 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 7

All Time: 1,828