Introduction

Over time the tripod mount can become damaged and the tripod will no longer thread into the camera. This guide will explain how to replace the tripod mount.

Image 1/1: Remove the two Phillips screws from the bottom cover using the Phillips #00 Screwdriver.
  • Turn the camera so the bottom of the camera is facing up.

  • Remove the two Phillips screws from the bottom cover using the Phillips #00 Screwdriver.

Add Comment

Image 1/1:
  • Lift and remove the bottom cover from the camera.

Add Comment

Image 1/1:
  • Remove the three screws securing the tripod mount using the Phillips #00 Screwdriver.

Add Comment

Image 1/1:
  • Lift and remove the tripod mount from the camera.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Ben Barber

Member since: 10/04/2011

343 Reputation

2 Guides authored

Team

UW Stout, Team 5-1, Zhou Fall 2011 Member of UW Stout, Team 5-1, Zhou Fall 2011

UWSTOUT-ZHOU-F11S5G1

3 Members

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 6

Past 30 Days: 44

All Time: 4,107