Skip to main content

You're viewing a previously published version of this guide.  View latest version

Older Newer

Introduction

This guide will teach a user how to replace a broken film rewind crank on the Canon AE-1 SLR. The film rewind crank allows the photographer to reel film back into its container once all exposures have been shot so that the film can be developed.

  1. Open the film compartment and place the screwdriver in the the slot to keep the shaft from moving.
    • Open the film compartment and place the screwdriver in the the slot to keep the shaft from moving.

  2. Remove the crank by rotating it counter-clockwise.
    • Remove the crank by rotating it counter-clockwise.

  3. Remove two phillips screws With the screws removed, the silver plate can now be removed as well.
    • Remove two phillips screws

    • With the screws removed, the silver plate can now be removed as well.

  4. Remove the film rewind crank.
    • Remove the film rewind crank.

Ben Barber

Member since: 10/04/2011

408 Reputation

2 Guides authored

Team

UW Stout, Team 5-1, Zhou Fall 2011 Member of UW Stout, Team 5-1, Zhou Fall 2011

UWSTOUT-ZHOU-F11S5G1

3 Members

8 Guides authored

View Statistics:

Past 24 Hours: 1

Past 7 Days: 25

Past 30 Days: 136

All Time: 20,252