Step 1 O-ring: Large Keycap




• Remove keycaps surrounding the key you'd like to install an O-ring under by following the remove small keycaps guide.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 2

• Pull the large keycap upward with your fingers until the cap separates from the plastic rings underneath the cap. If the metal bar beneath the cap comes loose during removal, snap it back in place.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 3
• Remove the plastic rings from the keycap.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 4
• Place the O-rings around the nubs underneath the keycap at each circled locations.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

<iframe id="dozuki-embed-32221" src="https://www.ifixit.com/Guide/embed/32221/full" width="800" allowfullscreen frameborder="0"></iframe> <script>window.addEventListener("message",function(a){var b=document.getElementById("dozuki-embed-32221"),c=a.data[0],d=a.data[1];switch(c){case"setHeight":b.style.height=d+"px"}},!1);</script> <iframe src="https://www.ifixit.com/Guide/embed/32221" width="800" height="584" allowfullscreen frameborder="0"></iframe>

Preview