Replacing Bush Pump Head and Handle

You're viewing a previously published version of this guide. View latest version

Aug 09, 2013 - 10:15:33

Mar 26, 2014 - 11:37:38 Oct 18, 2013 - 04:32:51 Aug 09, 2013 - 10:15:33 Aug 09, 2013 - 10:13:04 Aug 09, 2013 - 10:09:38 Aug 08, 2013 - 04:50:58 Aug 08, 2013 - 04:18:31 Aug 08, 2013 - 04:18:13 Aug 08, 2013 - 04:16:24 Aug 08, 2013 - 03:43:06 Aug 07, 2013 - 03:54:58 Aug 07, 2013 - 03:54:27 Aug 07, 2013 - 03:53:38 Aug 06, 2013 - 02:10:26 Aug 05, 2013 - 03:19:50 Aug 05, 2013 - 03:01:42 Aug 05, 2013 - 03:00:42 Aug 05, 2013 - 02:58:26 Aug 05, 2013 - 02:58:09 Aug 05, 2013 - 02:57:37 Aug 05, 2013 - 02:57:15 Aug 05, 2013 - 02:54:55 Aug 05, 2013 - 02:54:41 Aug 05, 2013 - 02:53:37 Jul 31, 2013 - 04:46:14 Jul 30, 2013 - 12:04:41 Jul 30, 2013 - 10:31:49 Jul 30, 2013 - 09:57:11 Jul 30, 2013 - 09:54:31 Jul 30, 2013 - 09:53:45 Jul 30, 2013 - 09:50:46 Jul 30, 2013 - 09:50:21 Jul 30, 2013 - 09:49:47 Jul 30, 2013 - 09:47:08

Newer

Introduction

Follow this guide to remove a bush pump's head and handle for repair or replacement. Be sure to use at least two people when following this guide to prevent injury, as the pump head can be heavy.

Step 1 Head and Handle

Replacing Bush Pump Head and Handle, Head and Handle: step 1, image 1 of 2

Replacing Bush Pump Head and Handle, Head and Handle: step 1, image 2 of 2

Test pump performance by pumping 40 strokes.
An effective pump should return at least 10 liters.

Step 2

Remove the two pins connecting the handle to the slider.

Step 3

Pull the two lever arms away from the slider.

Step 4

Lift the two pins attaching the pump frame to the head and handle up, off of the pump frame.

Step 5

Replacing Bush Pump Head and Handle: step 5, image 3 of 3

Throughout this step, make sure you support the handle and head with at least three hands.
Slide the bearing rod out of the head.
Inspect the bearing rod and head for any wear or tear.