Introduction

Damaged presserfoot? It is easy to replace and this guide will take you through the necessary steps.

Make sure the presser foot is in the up position.
  • Make sure the presser foot is in the up position.

  • The switch should be up, not in the vertical position.

Add Comment

Adjust the needle to the top of its stroke using the hand wheel.
  • Adjust the needle to the top of its stroke using the hand wheel.

Add Comment

Lift the arm on the back of the presser foot assembly to release the foot. Lift the arm on the back of the presser foot assembly to release the foot.
  • Lift the arm on the back of the presser foot assembly to release the foot.

Add Comment

Remove the presser foot.
  • Remove the presser foot.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Kevin Bickers

Member since: 02/05/2014

532 Reputation

4 Guides authored

Team

Cal Poly, Team 2-12, Amido Winter 2014 Member of Cal Poly, Team 2-12, Amido Winter 2014

CPSU-AMIDO-W14S2G12

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 5

All Time: 724