Skip to main content

Fix Your Stuff

Right to Repair

Store

You're viewing a previously published version of this guide.  View latest version

Older Newer

Introduction

This guide will walk you through the process of replacing a dull or broken cutter blade on a Brother PT-D200.

  1. Open the back panel of the device by pressing down on and then pulling the indication arrows on the top center of the cover upward towards you. Open the back panel of the device by pressing down on and then pulling the indication arrows on the top center of the cover upward towards you.
    • Open the back panel of the device by pressing down on and then pulling the indication arrows on the top center of the cover upward towards you.

  2. SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits

    SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits
  3. Locate the cutter blade unit (mint green) as shown in the picture.
    • Locate the cutter blade unit (mint green) as shown in the picture.

  4. Using the thumb and forefinger, pull up, applying a moderate amount of pressure until the cutter blade unit loosens and is removed. The blade is sharp.
    • Using the thumb and forefinger, pull up, applying a moderate amount of pressure until the cutter blade unit loosens and is removed.

    • The blade is sharp.

Blaire McCreary

Member since: 01/24/2014

201 Reputation

2 Guides authored

Team

Cal Poly, Team 13-16, Regan Winter 2014 Member of Cal Poly, Team 13-16, Regan Winter 2014

CPSU-REGAN-W14S13G16

3 Members

6 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 17

All Time: 1,450