Introduction

In this guide, you will see how to fix your broken/damaged face plate on your Brother PT-1290.

Turn the device to it's side toward the bottom of the keyboard. Then pop open the case and remove the batteries. Turn the device to it's side toward the bottom of the keyboard. Then pop open the case and remove the batteries. Turn the device to it's side toward the bottom of the keyboard. Then pop open the case and remove the batteries.
  • Turn the device to it's side toward the bottom of the keyboard. Then pop open the case and remove the batteries.

Add Comment

Remove back of device and set aside. Remove back of device and set aside. Remove back of device and set aside.
  • Remove back of device and set aside.

Add Comment

Remove all 1/4 inch screws(6 total) with a (+PH00) screwdriver. Open slowly not to damage the display data cable. Remove all 1/4 inch screws(6 total) with a (+PH00) screwdriver. Open slowly not to damage the display data cable. Remove all 1/4 inch screws(6 total) with a (+PH00) screwdriver. Open slowly not to damage the display data cable.
  • Remove all 1/4 inch screws(6 total) with a (+PH00) screwdriver. Open slowly not to damage the display data cable.

Add Comment

Use a plastic opening tool to remove the flat-panel membrane keyboard. Lift up and set aside. Use a plastic opening tool to remove the flat-panel membrane keyboard. Lift up and set aside. Use a plastic opening tool to remove the flat-panel membrane keyboard. Lift up and set aside.
  • Use a plastic opening tool to remove the flat-panel membrane keyboard. Lift up and set aside.

Add Comment

Use a spudger to aid in removing the keyboard. Gently lift out while removing the LCD screen that is connected to the data cable and finishing removing. Gently lift out while removing the LCD screen that is connected to the data cable and finishing removing.
  • Use a spudger to aid in removing the keyboard.

  • Gently lift out while removing the LCD screen that is connected to the data cable and finishing removing.

Add Comment

Now that you have removed your keyboard. Turn the device over carefully. Pop of LCD black cover. Use the spudger to gently press out the LCD screen.
  • Now that you have removed your keyboard. Turn the device over carefully.

  • Pop of LCD black cover.

  • Use the spudger to gently press out the LCD screen.

Add Comment

Change out old damaged face plate with your new face plate.
  • Change out old damaged face plate with your new face plate.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Lorraine Canez

Member since: 10/25/2014

301 Reputation

3 Guides authored

Team

Gateway, Team 1-4, Johnson Fall 2014 Member of Gateway, Team 1-4, Johnson Fall 2014

GCC-JOHNSON-F14S1G4

3 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 3

All Time: 72