Introduction

Use this guide to replace the automatic document feeder (ADF) on your Brother IntelliFax-2840.

Parts

No parts required.

  1. Remove the two 15 mm Phillips #1 screws securing the ADF at the rear of the fax machine.
    • Remove the two 15 mm Phillips #1 screws securing the ADF at the rear of the fax machine.

  2. Gently pull the ADF up and away from the machine.
    • Gently pull the ADF up and away from the machine.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Geoff Wacker

Member since: 09/30/2013

73,687 Reputation

84 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 4

All Time: 405