Fix Your Stuff Community Store

Brentwood TS-292B Power Cable Replacement

Introduction

This guide will show how to remove and replace the power wire in a Brentwood TS-292B toaster.

What you need

  1. Brentwood TS-292B Power Cable Replacement, Power Cable: step 1, image 1 of 1

    • Remove the five 6mm screws on the bottom of the toaster with a Phillips #2 screw driver.

    Edit

  2. Brentwood TS-292B Power Cable Replacement: step 2, image 1 of 1

    • To remove the toasting lever, pull the lever away from the toaster.

    Edit

  4. Brentwood TS-292B Power Cable Replacement: step 3, image 1 of 1

    • Unplug the wire connecting the casing to the circuit board to fully remove the toaster casing.

    Edit

  5. Brentwood TS-292B Power Cable Replacement: step 4, image 1 of 1

    • Unscrew the wire bracket with a Phillips #2 screw driver.

    Edit

  6. Brentwood TS-292B Power Cable Replacement: step 5, image 1 of 1

    • Pull back on the black tab that is holding the circuit board in place.

    • While pulling the tab back, lift up on the circuit board.

    Edit

  7. Brentwood TS-292B Power Cable Replacement: step 6, image 1 of 1

    • Desolder the power wire connections on the circuit board.

    • Desolder in a well ventilated area.

    • The tip of soldering iron is hot handle with caution.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 3

All Time: 148