Fix Your Stuff

Repair Guides

Learn how to fix just about anything with our step-by-step guides.

App

Your pocket repair helper.

FixBot

The friendly AI repair assistant.

Repairability

Learn why fixable products make sense.

Teardowns

Get a sneak peek inside the latest gadgets.
Community

Answers Forum

Share solutions and get help from a friend.

Find Your Community

Find teams, events, and fellow fixers.

Help Out

Help make repair knowledge free and accessible for everyone.

Right to Repair

Learn about the Right to Repair movement and how to be an advocate.
Store

Featured

Quality parts and tools backed by our lifetime guarantee.

Tools

Shop our wide selection of precision tools.

Parts

Shop parts backed by our quality guarantee.

iPhone Batteries

Batteries tested and guaranteed plus a kit with everything you need.

Free Shipping on Domestic Orders $75+

Braven BRV-X Button Module(s) Replacement

Introduction

If the buttons on your speaker are not working, they may need to be replaced. Use this guide to replace the button module on your Braven BRV-X.

What you need

    1. Braven BRV-X Button Module(s) Replacement, Front Speaker Panel: step 1, image 1 of 1

      • Remove four 1.1 cm outer screws in the outer shell using the Phillips #00 screwdriver.

      Edit
      Ask FixBot

      Add Comment

    2. Braven BRV-X Button Module(s) Replacement: step 2, image 1 of 1

      • Remove four 1.3 cm inner screws in the outer shell using the 1.5mm Hex screwdriver.

      Edit
      Ask FixBot

      Add Comment

    3. Braven BRV-X Button Module(s) Replacement: step 3, image 1 of 1

      • Gently remove the outer shell.

      Edit
      Ask FixBot

      Add Comment

    4. Braven BRV-X Button Module(s) Replacement: step 4, image 1 of 2 Braven BRV-X Button Module(s) Replacement: step 4, image 2 of 2

      • Cut adhesive tape on both sides.

      Edit
      Ask FixBot

      Add Comment

    5. Braven BRV-X Button Module(s) Replacement: step 5, image 1 of 2 Braven BRV-X Button Module(s) Replacement: step 5, image 2 of 2

      • Remove eighteen 0.9cm screws in the inner shell using the Phillips #00 screwdriver.

      Edit
      Ask FixBot

      Add Comment

    7. Braven BRV-X Button Module(s) Replacement: step 6, image 1 of 3 Braven BRV-X Button Module(s) Replacement: step 6, image 2 of 3 Braven BRV-X Button Module(s) Replacement: step 6, image 3 of 3

      • Pry open the glued inner shell using a spudger around all sides of the shell.

      • Don't use too much pressure as that could cause damage to the plastic.

      Edit
      Ask FixBot

      Add Comment

    8. Braven BRV-X Button Module(s) Replacement: step 7, image 1 of 2 Braven BRV-X Button Module(s) Replacement: step 7, image 2 of 2

      • Remove ten 0.7 cm screws in the front plate using the 1.5 mm Hex screwdriver.

      Edit
      Ask FixBot

      Add Comment

    9. Braven BRV-X Button Module(s) Replacement: step 8, image 1 of 2 Braven BRV-X Button Module(s) Replacement: step 8, image 2 of 2

      • Use a spudger to open the front speaker plate.

      Edit
      Ask FixBot

      Add Comment

    10. Braven BRV-X Button Module(s) Replacement: step 9, image 1 of 1

      • Remove three 1.0 cm screws from the battery unit.

      • It is recommended (but not required) to remove the battery.

      Edit
      Ask FixBot

      Add Comment

    11. Braven BRV-X Button Module(s) Replacement: step 10, image 1 of 2 Braven BRV-X Button Module(s) Replacement: step 10, image 2 of 2

      • Disconnect the ribbon cable attached the main board.

      Edit
      Ask FixBot

      Add Comment

    12. Braven BRV-X Button Module(s) Replacement: step 11, image 1 of 3 Braven BRV-X Button Module(s) Replacement: step 11, image 2 of 3 Braven BRV-X Button Module(s) Replacement: step 11, image 3 of 3

      • Pry open the second plate holding in the speaker using a spudger around all sides.

      • It is recommended to use a spudger to remove the heavily glued areas between the plates before prying.

      • Don't use too much pressure as that could cause damage to the plastic.

      Edit
      Ask FixBot

      Add Comment

    13. Braven BRV-X Button Module(s) Replacement: step 12, image 1 of 3 Braven BRV-X Button Module(s) Replacement: step 12, image 2 of 3 Braven BRV-X Button Module(s) Replacement: step 12, image 3 of 3

      • Cut the 20 gauge wires attached to the front IR sensor and two speaker wires.

      • Leave enough length on the wire to work with it afterwards.

      • Cut the 22 gauge wire attached in the corner.

      • Solder the new speaker plate during reassembly.

      • To properly solder and desolder connections, visit the How to Solder and Desolder Connections guide.

      Edit
      Ask FixBot

      Add Comment

    1. Braven BRV-X Button Module(s) Replacement, Button Module(s): step 13, image 1 of 2 Braven BRV-X Button Module(s) Replacement, Button Module(s): step 13, image 2 of 2

      • Remove the ribbon cable attached to the main board.

      • Pull from the clip and not from the cable.

      Edit
      Ask FixBot

      Add Comment

    2. Braven BRV-X Button Module(s) Replacement: step 14, image 1 of 1

      • Remove three 0.7 cm screws from the button module(s) using the Phillips #00 screwdriver.

      Edit
      Ask FixBot

      Add Comment

    3. Braven BRV-X Button Module(s) Replacement: step 15, image 1 of 1

      • Gently lift the button module from the enclosure.

      Edit
      Ask FixBot

      Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

with 1 other contributor

Trey Peterson

Member since: 04/01/19

301 Reputation

2 Guides authored

Badges: 4

+1 more badge

Team

IUPUI, Team S1-G5, Harley Spring 2019 Member of IUPUI, Team S1-G5, Harley Spring 2019

IUPUI-HARLEY-S19S1G5

3 Members

24 Guides authored

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 29

All Time: 757