Introduction

Over time, the front grill may become dirty and need cleaning, or another component further inside the device may require maintenance. Use this guide to remove the front grill and access internals or perform any necessary cleaning.

Parts

No parts required.

Image 1/3: Push down on the spudger, lifting the front panel away from the top panel until it pops out of the right side. Image 2/3: Repeat for the left side of the device. Image 3/3: Too much pressure may break the panel, but it should flex slightly before it pops out.
  • Wedge the spudger between the top and front panel on the right side of the device.

  • Push down on the spudger, lifting the front panel away from the top panel until it pops out of the right side.

  • Repeat for the left side of the device.

  • Too much pressure may break the panel, but it should flex slightly before it pops out.

Add Comment

Image 1/3: Apply pressure and move the spudger upward until the front grill pops out. Image 2/3: Repeat for the right side of the device. Image 3/3: Repeat for the right side of the device.
  • Once the panel is released on the left side, wedge the spudger between the top panel and front grill of the device as shown.

  • Apply pressure and move the spudger upward until the front grill pops out.

  • Repeat for the right side of the device.

Add Comment

Image 1/1:
  • Lift the front grill away from the device.

Add Comment

Conclusion

To reattach the front panel, press it into the front of the device until it pops back into place.

Cassie Harriman

Member since: 04/18/2017

525 Reputation

5 Guides authored

Team

Cal Poly, Team S15-G2, Banghart Spring 2017 Member of Cal Poly, Team S15-G2, Banghart Spring 2017

CPSU-BANGHART-S17S15G2

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 56